SPECIFICATIONS

Operating Voltage Range: 9～32VDC Volts

Nominal Operating Resistance: 300Ω

Relay Contact Ratings: 2A/30VDC

Operating Humidity Range: 95% RH, Non-condensing

Operating Temperature Range: -10°C to 50°C (14°F to 122°F)

Dimensions: W89mm ,H93mm, D26mm

Base Dimensions: W87mm ,H87mm, D31.5mm

Weight: Net Weight 125g (with base)

Colour/Case Material: Red/ ABS

INSTALLATION

This manual should be left with the owner/user of this equipment.

The call points should be installed in a position where they will not be subjected to mechanical stresses , and

where the temperature is within the operating temperature range.

Areas where there are , or are likely to be, aggressive substances should be avoided .

TO ACTIVATE ALARM

The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency

condition by its button latches. The call point has one 300 ohm resistor is used on the PCB board between

Zone+ and Zone- or one relay contact (NO, COM, NC ) output when the button is pressed.

深圳市众安科电子有限公司