Conventional Sound Strobe /Horn Strobe

SPECIFICATIONS

Operating Voltage Range: 16 to 30 VDC Volts

Alarm Current 100 to 150 mA@ 24 VDC

Strobe Flash Rate: 1 flash per second

Strobe Lifetime: Minimum 40000 times

Alarm Sound Intensity: Minimum 100dB

Alarm Sound Tune: Selectable: I-Ambulance, II-Police Car, III- Fire-engine

Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing

Operating Temperature Range: -10°C to 50°C (14°F to 122°F)

Input terminalWire Gauge: 12 to 18 AWG

Dimensions: Length160mm, Width 117mm, Depth 46mm

Weight: Net Weight 236g, Gross Weight 285g

BEFORE INSTALLING

NOTICE: This manual should be left with the

owner/user of this equipment.

GENERAL DESCRIPTION

The SG109 Sound Strobe of notification appliances offers

a wide range of Sound/strobes, for wall and ceiling

applications, indoors and outdoors. They are designed to

be used in 24 volt DC systems.

Loop Design and Wiring

The system designer must make sure that the total current

drawn by the devices on the loop does not exceed the

current capability of the panel supply, and that the last

device on the circuit is operated within its rated voltage.

When calculating the voltage available to the last device,

it is necessary to consider the voltage drop due to the

resistance of the wire. The thicker the wire, the smaller

the voltage drops. Wire resistance tables can be obtained

from electrical handbooks.

INSTALLATION

NOTE: All wiring must conform to applicable local

codes, ordinances, and regulations.

Mounting Indoor Wall or Ceiling Products

1. Attach mounting plate to junction box .

2. Connect field wiring to terminals

3. To attach product to mounting plate.

4. Secure product by tightening the two mounting screws

in the front of the product housing.

深圳市众安科电子有限公司